Seamless Communication. Exceptional Performance.
Mounts are essential for installing indoor (broadcast) antennas and outdoor (donor) antennas on a building. Typically, antennas are mounted on the roof using a mounting pole and brackets, which helps keep the antennas stable and sturdy and pointed in the right direction.
Panel and dome broadcast antennas use out-of-sight mounting for permanently securing an indoor antenna. By mounting the antenna high on the wall or ceiling, this piece helps improve the signal efficiency and quality in an indoor commercial setting.
Antenna Pole Mounting Assembly
10" Length, 1.5" Diameter. Outdoor Antenna Mounting Pole. Designed for Mounting External Antennas for Cell Phone Signal Boosters. Includes U-Bracket Assembly and Wall Mount Bracket.
Ceiling Mount for Panel
Permanent and fixed ceiling mount for panel antennas. Works with 304451, 304471, 311155, 304472.
In Ceiling Antenna Mount
In ceiling mount for cell signal booster antennas.
In-Wall Panel Antenna Mount
Designed with bracket to mount Indoor Cell Phone Signal Booster Antenna inside an interior wall. Compatible with antennas 311135 and 311155. Features Paintable Cover.
Omni Antenna Building Mounting Bracket
Bracket designed to mount outdoor omni-antennas for cell phone signal boosters to the outside of a building. Compatible with antennas 311201 and 311203.
Pole Mount for Panel Antenna
Permanent and fixed outdoor building pole mount for panel antennas. Works with all Wilson Panel Antennas.
Wall Mount for Panel Antenna
Wall Mount for Panel Antennas. Works with all Wilson indoor Panel Antennas.
Window Mount for Panel
Temporary and adjustable indoor window mount for panel antennas. Designed for use in a building. Works with all Wilson Panel Antennas.
Mounting Plate for DataPro, Signal 3G, and Signal 4G boosters.
3 dBi Terminal Antenna
<span>The weBoost 311159 dual band terminal antenna works with Wilson Pro RF Signal Meter 460118.</span><span> Used for cellular signal and frequency mapping. It has an SMA male connector.</span>
3 Way Mount with Spade Stud
Compatible with Cell Phone Signal Booster Trucker Antenna 311101 & RV Antenna 311133. Allows Mounting of Exterior Antennas on Roof Edge or Mirror Bracket. 3/8-24 Thread. 5 Millimeter Chrome-Plated Aluminum. Hardware Included.
3/8'' NMO with 14ft RG174
3/8'' NMO with 14ft of RG174, and SMA Male connector. This mount allows for mounting with a Wilson NMO Antenna on a vehicle roof or similar surface.
Gooseneck Suction Cup Mount
Adjustable Flexible Gooseneck Interior Mount for Cradle Style Vehicle Cell Phone Signal Boosters. Securely Holds Mobile Booster by Mounting to the Windshield. For use with Drive 3G-S, Drive 4G-S, Drive 3G Flex & Cradle Plus.
Horizontal Mount with Spade Stud
Compatible with Cell Phone Signal Booster Trucker Antenna 311101 and RV Antenna 311133. Allows Mounting of Exterior Antennas on Horizontal Bracing. 3/8-24 Thread. 5 Millimeter Chrome-Plated Aluminum. Hardware Included.
Marine Antenna Mount | 901119
For use with Marine Cell Phone Signal Booster Antenna 311130. Attaches to boat or watercraft using 4 screws on base. Includes adjustment and cinching arms. Standard 1 inch by 14 thread.
Mirror Mount for Mack/Freight
<span>Permanent and fixed mirror Mount for Mack / Freightliner.</span>
NMO Mount 3/4 in.
<span>For use with Vehicle NMO Non Magnet Mount Cell Phone Signal Booster Antennas. 14ft RG-174 Cable with SMA-Male Connector. Requires 3/4 inch hole in sheet metal surface for connection.</span>
NMO Mount 3/4 inch | 901150
For use with Vehicle NMO Non Magnet Mount Cell Phone Signal Booster Antennas. 14 ft RG-58U Cable with SMA-Male Connector. Requires 3/4 inch hole in sheet metal surface for connection.
NMO Mount 3/8 inch
For use with Vehicle NMO Non Magnet Mount Cell Phone Signal Booster Antennas. 14 ft RG-58U Cable with SMA-Male Connector. Requires 3/8 inch hole in sheet metal surface for connection.
See what WilsonPro can do for you
FILL OUT THE FORM TO RECEIVE INFORMATION AND UPDATES